Let’s take a look at Rogue Hundo Pricing for Black Friday that Rogue Fitness has for 2021.
Rogue Fitness is one of the best gym equipment manufacturers and retailers in the world. If their products are on the expensive side, there’s a good and valid reason for that. But do you know that there are ways to purchase their products at a lower price? Check out Rogue’s Hundo Pricing for Black Friday.
Here are some of the deals you can get NOW:
R
Rogue Hundo Pricing for Black Friday – Overview
Rogue Fitness is the foremost manufacturer of strength and conditioning equipment, including power racks, barbells, sleds, plates, and accessories. It was founded in a garage in 2006 and has now expanded to over 1400 team members globally. Rogue is the official equipment supplier of the CrossFit Games, USA Weightlifting, the Arnold Strongman Classic, and the World’s Strongest Man competition. The organization remains committed to serving the necessities of serious athletes at all levels, from the garage to the arena. Rogue offers a lifetime warranty to their products designed to take abuse which means that they are confident in the products that they produce.
With the lifetime warranty and the quality of their products, they also come at a higher price. But Rogue offers different kinds of discounts all year round to cater to all their customers and allow them to experience the Rogue trademark. One of them is through Hundo Pricing, which is bulk discounts that happen on Black Friday. The idea is to purchase more weight and get them at a lower cost. So if you are buying plates and kettlebells for your commercial gym or home garage, this is the right time to buy them as you will surely save a lot of money.
Rogue MIL Spec Echo Bumper
The Rogue MIL-Spec Echo Bumpers have stainless steel inserts enclosed by quality rubber, with a tested shore A durometer of 90 (for the 10LB and 15LB plates) and 88. The five-weight increments measure the IWF standard 450mm in overall diameter and highlight a matte black finish and raised black lettering for the Rogue logo and LB weight indications.
These bumpers are created with durability and dead bounce in mind. They have been officially approved for use with the United States Army’s Combat Fitness Test, a 6-event readiness assessment replacing the previous 3-event Army Physical Fitness Test in 2020. The width of each plate depends on its weight: 10LB Plate = 0.83″ 15LB Plate = 1.2″ 25LB Plate = 1.6″ 35LB Plate = 2.07″ 45LB Plate = 2.72″
Rogue Deep Dish Plates
Rogue Deep Dish Plates were co-developed with Cadillac Casting, Inc. and OSCO Industries. Cadillac Casting, Inc. (Cadillac, MI) has created and designed a wide variety of intricate and safety-critical elements for the automotive industry and other industrial clients since the 1920s. Further production for the 5LB USA Olympic Change Plate was produced by OSCO Industries (Portsmouth, OH), which has conducted foundries in South-Central Ohio for almost 150 years. Both of these firms play a pivotal role in producing quality cast iron weight plate production back to the USA.
All of Rogue’s Deep Dish Plates (and the 10LB Change Plate) are cast in ductile iron, which includes powerful graphite nodules that make it more solid than standard gray iron. The whole back portion of each DD plate is precision machined, as is the center hub (where the bar sleeve goes through) and the outer rim. This exclusive three-surface machining process guarantees that the plates fit securely on the bar, are equal in diameter and sit flush against each other when loaded.
Rogue USA Olympic Plates
Each Rogue USA Olympic Plates highlights precision machining on the back of the plate, the center hub, the outside rim, and the front-facing of that rim. The exclusive four-surface machining process guarantees that the plates fit firmly on the bar, are equal in diameter, and rest flush against each other when loaded. These plates are made with a slim width (from 0.76” in the 10LB plate to 1.05” in the 55LB plate), similar to Rogue Calibrated Steel Powerlifting Plates.
The casting expertise of Cadillac and OSCO furnishes each plate with crisp detailing and a clear division between the embossed Rogue branding, weight indications, and “Made in the USA” lettering. The look is finished with an E-Coat finish, an electrically applied paint coating originally produced for the automotive industry due to its outstanding adhesion, uniform coverage, and corrosion resistance.
Rogue Color Lb Training 2.0 Plates
Rogue Color LB Training 2.0 Plates are color-coded bumpers and are an IWF standard 450MM in diameter, with a narrow width that provides more weight to be stacked on the bar. These plates are trusted in the official Reebok CrossFit Games competition and represent the next generation.
They are modernized with new artwork and a gloss-matte-gloss finish with a tested Shore A durometer of 86 to lessen the bounce on the drop and won’t break down with heavy use. The color-coding of the LB Training Plates makes them easy to recognize, helping you do more productive workouts.
Rogue Echo Bumper Plates
Rogue Echo Bumper Plates are budget-friendly plates that can fully equip a new garage gym. These plates are officially approved for use with the United States Army’s Combat Fitness Test. They have an IWF standard 450MM diameter, minimum surface blemishes, and a weight within 1% of their target.
Coupled with stainless steel inserts and quality virgin rubber, the Echos render a dead bounce and durability unusually observed in an economical plate. The Echo Plates will not disappoint if you are looking for plates that will be reliable workhorses at a reasonable price.
Rogue Machined Olympic Plates
Rogue Machined Olympic Plates are available in a unique gray hammer tone finish with raised black text and are sold in pairs. These time-tested cast iron plates vary from 2.5LB up to 45LB, with custom orders available to furnish your affiliate or home gym as needed.
Rogue Machined Olympic Plates offer higher precision than many similar steel plates in the industry. Classic steel Olympic plates are the gold standard for many earnest lifters, and quality machining can mean the distinction between a PR and a near miss.
Rogue KG Competition Plates
The latest designs of Rogue KG Competition Plates incorporate a gloss-matte-gloss color finish with raised lettering, including Rogue branding and the IWF logo in white. They are approved by the International Weightlifting Federation and were tested on a Shore A Durometer scale. The KG Competition Plates’ average measurement was a 94, which presents a steady dead blow with the minimum bounce expected of high-end Olympic weightlifting bumpers. Less bounce means less time hunting your bar around the gym.
A raised rubber surface is now added to restrict direct metal-on-metal contact between the center discs. Whether stacked on the bar or a rack, the bumpers only get into contact with each other on the inner and outer flanges — reducing scuffing and helping to protect the plates’ finish and lettering. A convenient lip on the edge of the plate also makes it easier to pick up from the rack or off the ground.
Rogue Color KG Training 2.0 Plates (IWF)
This edition of the Rogue Color KG Training 2.0 Plates (IWF) highlights a dynamic Gloss-Matte-Gloss color finish: Red = 25KG, Blue = 20KG, Yellow = 15KG, and Green = 10KG. Each of these color-coded bumpers is an IWF standard 450MM in diameter, with a slim plate width that enables more weight to be loaded on the bar. A 50.40MM collar opening and steel disc insert keep the plates tightly in place even during extreme, high-rep training. The Shore A durometer of 86 assures a steady dead bounce to meet the needs of the serious Olympic lifter.
These plates are also refurbished with a gloss-matte-gloss finish + Rogue branding and the official IWF logo in white on both sides. Rogue KG Training Plates are approved by the International Weightlifting Federation with their quality construction (including a zinc-plated steel insert), precision (+/- 15 grams of claimed weight), and performance (86 durometer for decreased bounce).
Rogue HG 2.0 KG Bumper Plates
Rogue HG 2.0 KG Bumper Plates have a new design and are backed by a three-year warranty. These quality, budget-priced plates have a consistent dead bounce, durability, and distinctive smooth finish. Each bumper is an IWF standard 450MM in diameter but with a smaller width than most relative plates on the market.
HG 2.0 also scores an average of 88 on the Shore A Durometer scale, giving them a dead blow on par with a lot of the pricier competition plates in the industry. HG Bumpers have been battle-tested in the CrossFit Games and Regional competitions and offer a high-performance and smart, practical alternative for any training facility.
Rogue Kettlebell E Coat
All sizes of the E-Coat Rogue Kettlebell are cast in ductile iron and carry substantial graphite nodules that make it stronger than conventional gray iron. Ductile iron is commonly utilized to make automotive parts, wheels, gearboxes, and machine frames, and its higher tensile strength, yield strength, and corrosion resistance make it a perfect choice for a long-lasting, remarkably sturdy kettlebell.
This electrically applied paint coating was also originally produced for the automotive industry because of its superior adhesion, uniform coverage, and corrosion resistance. The E-Coat finish of the Rogue Kettlebells has a semi-gloss look and a gloss rating of about 22 GU (gloss units). The black shine/gloss of the finish is integrated into the design by debossed lettering/numbering for the weight indications (both LB and KG) on one side of the bell and Rogue branding on the other.
Rogue Kettlebell Powder Coat
The machining and powder coating of each Rogue Kettlebell Powder Coat is managed by skilled specialists, resulting in strong, precision-made, high-performance kettlebells. The kettlebells highlight a Class A Powder Coat finish for excellent grip, along with debossed weight indications (in both LB and KG) and Rogue branding. The 40LB / 18KG bell also meets the needed terms for the new Army Combat Fitness Test.
This kettlebell line results from a collective endeavor between Rogue and a group of uniquely equipped independent businesses, including two of the best metal casting foundries in the Midwest: OSCO Industries (Portsmouth, Ohio) and Cadillac Casting, Inc. (Cadillac, Michigan).
Rogue Hundo Pricing for Black Friday – In Summary
That’s our close-up look at Rogue Hundo Pricing for Black Friday.
Buying in bulk during the Hundo Pricing can save you money on the products that you will be purchasing and shipping. The more weight you get, the less it costs, so getting plates and kettlebells during Black Friday is the right moment for that purchase. Not only will you get discounts but you can also be sure that the products you are getting are high-quality and will last a lifetime.
Photo Credits
Product photos on this page are property of Rogue.
This website is not affiliated or associated with CrossFit, Inc. CrossFit is a registered trademark of CrossFit, Inc.
Affiliate Disclaimer
We are an affiliate of Rogue and others that sell this training gear. If you buy clothing or other training gear after clicking the links in this article, we receive a small commission at no extra cost to you. This helps us to bring you in-depth information and content on these great training products.
